Topaz Video AI remains one of the strongest AI video enhancement tools available, but its pricing, hardware requirements, and advanced controls are not ideal for everyone.
We tested HitPaw VikPea, AVCLabs Video Enhancer AI, and Aiarty Video Enhancer against Topaz on the same footage, make Topaz Alternative for different types of users. The right pick depends on the quality, speed, budget, and hardware you need.
| Tool | Best For | Quality | Model / Mode Tested | Processing Time (tested)* | Cost | GPU / Hardware |
|---|---|---|---|---|---|---|
| Topaz Video AI | Professionals | Best on archival/restoration | Starlight HQ / Sharp | ~12–25 min (≈0.6–1.3 fps) — slowest | $299/yr | 10GB+ VRAM |
| HitPaw VikPea | Creators & family video users | Output quality closest to Topaz's, in an easier one-click workflow | UHD Restoration / AI Generative | ~2–5 min (≈3–8 fps) | ~$100/yr | NVIDIA GPU with 4GB |
| AVCLabs Video Enhancer AI | Sports & motion video creators | Strong on anime/motion details | Ultra Multi-Frame | ~4–8 min (≈2–4 fps) | $119.95/yr | Dedicated GPU with 6GB+ |
| Aiarty Video Enhancer | Casual users | Best on lightweight, can over-sharpen hard edges | moDetail-HQ v3 / Step Mode | ~3-5 min (≈8–20 fps) — fastest | $79/year | GPU with 4GB+ |
*Topaz Video AI perpetual license discontinued Oct 2025
Processing times tested on the same 30-second Seedance-generated clip upscaled to 4K, using each tool's top-quality mode (see Model / Mode Tested above).
Topaz packs several specialised models like Proteus, Iris, Starlight, and others into one interface, and getting a good result means picking the right model and settings for each clip. That's more trial and error than most casual users expect.
Newer models like Starlight require 10GB+ VRAM, and Topaz recommends 32GB RAM and 8GB VRAM overall, more than most people need just to clean up a few old clips.
Topaz Labs also dropped perpetual licenses in October 2025, moving to a $299/year subscription (Pro at $699/year). The backlash is visible on r/TopazLabs, in a thread from around December 2025 where the top reply argued Topaz Video AI is no longer worth the price and pulled in a disproportionate share of the thread's upvotes.
For casual users hit by both the hardware demands and the new pricing, HitPaw VikPea, AVCLabs, and Aiarty each make a solid alternative to Topaz AI.
Best for:
Content creators, family video users, and interview or vlog creators who want the best balance of video quality, processing speed, face enhancement, and ease of use.
Key advantages:
Seven AI models cover restoration, colorization, background removal, face enhancement which auto-selected for your clip
Fixed the noise and inconsistent detail we saw on our AI-generated test clip
A face-enhancement model built for portraits and interviews, not a stretched general upscaler
4K/8K upscaling on a GPU with as little as 4GB VRAM
Built-in background removal alongside restoration and upscaling
Compared with Topaz:
About a third of Topaz Personal's annual cost ($100–120/year vs. $299-699/year)
Full 8K output on just 4GB VRAM, well under Topaz's 8GB+
One-click model matching, no manual tuning needed
Second-fastest of the four in our test, about 4 min, vs. Topaz's 12 min on the same clip (roughly 3x faster)
Limitations:
VikPea's enhancement controls are less granular, and it can't match Topaz's specialised model tuning on the hardest restoration jobs. It's the right call for everyday upscaling at a lower cost — just don't expect it to replace Topaz on archival-grade work.
Best for:
Sports creators and users working with low-frame-rate, slow-motion, shaky, or fast-moving footage where motion processing is the priority.
Key advantages:
Frame interpolation up to 120 FPS, Motion Compensation, and multi-frame enhancement
Fixed the choppy motion and flicker we saw on our AI-generated test clip
Also does stabilization, face enhancement, denoising, and colorization
4K output on dedicated GPUs with 6GB+ VRAM
Read the full AVClabs Video Enhancer review
Compared with Topaz:
$119.95/year vs. Topaz's $299/year
Runs on 6GB+ VRAM vs. Topaz's 10GB+ for Starlight-quality output
Purpose-built motion tools (120 FPS interpolation, Motion Compensation) that go further than Topaz's general motion deblur
About 4–8 min vs. Topaz's 12–25 min (roughly 2–4x faster)
Limitations:
Multi-frame modes can be GPU-intensive and slow to process, and outside motion-heavy footage, its restoration toolkit feels thinner than Topaz's broader one.
Best for:
Casual users and beginners working with 480p or 720p footage who want an affordable entry point for AI video upscaling.
Key advantages:
Upscaling, denoising, detail recovery, and frame interpolation in one lightweight tool
Fastest of the four in our test, about 1–2 min per clip with Step Mode
4K output on GPUs with just 4GB+ VRAM
$79/year, the cheapest option here
Read the full Aiarty Video Enhancer review
Compared with Topaz:
$79/year vs. Topaz's $299/year — about a quarter of the cost
Runs on just 4GB+ VRAM vs. Topaz's 10GB+ for Starlight-quality output
Fastest of the four in our test — about 3 min vs. Topaz's 12 min
Narrower model selection than Topaz's full suite, but far quicker to pick up
Limitations:
Aiarty's restoration control is fairly basic, fine for straightforward upscaling, less so for something like face-detail recovery. For occasional users who just want an affordable way to upscale casual footage, that trade-off makes sense.
We tested each tool using the same mix of footage to keep the comparison consistent.
Low-resolution online videos: 480p and 720p clips with compression and lost detail.
AI-generated videos: We used a 30-second Seedance-generated clip for this. Footage like this typically renders at only 720p or 1080p and showed noise and inconsistent detail between frames in our test, along with choppy motion and flicker whenever the camera or a subject moved.
VHS footage: Soft, noisy recordings with analogue artefacts.
DVD content: Standard-definition and interlaced footage.
We compared each tool on:
Output quality: Detail recovery, sharpness, faces, noise, and artefacts.
Processing speed: Time required to enhance and export footage.
Ease of use: Setup, model selection, and overall workflow.
Pricing: Current licence or subscription cost and value.
Hardware requirements: GPU, VRAM, and RAM requirements.
All tools were tested on a Windows PC with an RTX 4070 (12GB VRAM) and 32GB RAM, using each tool's default enhancement settings unless otherwise noted, to keep hardware conditions consistent across Topaz Video AI and its alternatives.
Yes, especially for professionals working with difficult footage. Topaz remains hard to replace because of its advanced restoration tools and specialised models.
Starlight: Delivers exceptionally detailed enhancement on complex footage when paired with high-end hardware.
Motion deblur and processing: Handles challenging motion blur and difficult movement effectively.
Advanced restoration: Specialised detail reconstruction and deinterlacing give professionals greater control over demanding projects.
The trade-off is cost and hardware. Topaz Video AI currently runs $299/year (Personal) or $699/year (Pro), requires a capable dedicated GPU, and some advanced models need substantial VRAM. Complex projects can also take longer to process.
For professionals who need maximum control and restoration quality, and don't mind the price and learning curve that comes with it, Topaz remains one of the strongest choices.
If the learning curve, hardware demands, or $299–$699/year cost from earlier in this guide are the dealbreaker, here's the short version:
Want an easier workflow, strong face enhancement, and 8K output at a fraction of the price? → HitPaw VikPea
Restoring shaky, slow-motion, or fast-moving sports footage? → AVCLabs Video Enhancer AI
Just want an affordable, no-fuss way to upscale a few old clips? → Aiarty Video Enhancer
Not sure which to pick? Try HitPaw VikPea's free trial and see how it handles your own footage.